หน้าเว็บ

วันพุธที่ 22 กุมภาพันธ์ พ.ศ. 2555

Update and flash rom MID, Irobot and android copy china.


Flash (Up rom) Tablet จีน iRobot 7″ Android 2.2 Froyo VIA8650

Uberoid for WM8650

NEWEST. Flash Player ready, Improved WIFi- Sound-Battery-New Icons-New Launcher.
FASTEST. Ready to install on a lot of WM8650 powered tablet
.

IF USE changer.bat, below is a list of very probably supported devices. 

NOTE : changer.bat software is a Uberoid HCH tool.



Now supports a lot of devices:
1=Maylong M-250 7" (Tested by HcH)
1=MID V7 7"
1=Fview NL Intertoys 7"
1=MID E18 7"
1=M009S Green LED 7"
1=TomTec Tablet 7"
2=M009S Blue LED 7" (Tested by HcH thanks to Javielopr)
2=Polaroid MPC700G 7"
2=Epad GW-70 7"
2=MIDV7 Blue LED 7"
2=WinPad-C07 7"
3=M003S 8" (Tested by HcH thanks to WISO66)            
3=Innovatek MID 7"
4=PC-802 8"            
5=BLY-806 8"
5=VIA WM8650 8"
6=M80003W 8" (Thanks for testing Tomb!)          
6=M806B 8"
6=MID M80006 8"
7=Apex 7" (Thanks for testing babak and bonsoir!)             
7=BLY-706F v1 7"
7=M706S 7"
7=Kingcom Joypad 72 7"
8=MID703 7"
8=Netbook WM8650 7"            
8=V7 MID 7"
8=ILC PC Tab701 7"
8=KLD-MID701 7"
8=Scipad 7"
8=MID710 7"
8=CE037B 7"
8=eMatic eGlide2 7"
9=Tabtech 7" (Thanks for testing Nick_1964 and Swel!)
9=M010S 7"
9=FlashTab 7"
9=Xiron 7"
9=TomTec 7"
10=M80003W v1.5.x (Thanks ctwinter!)
10=M012S 8"             
11=M70007T 7" (Thanks for testing nio!)          
11=ViaPad M7 7"
11=VIA WM8650 7"
11=M768A 7"
11=Leader V70 7"
11=Epad GW-707 7"
12=ATF3416-7 7"         
12=NeoPad8650 7" (Thanks Rastarn!)
13=BLY-706F v3 7"
13=NETPAD 11 7"
13=Zixoon Z78 7"
14=E16 5cun1603 5"
15=ED99 8cun1603 8"     
15=MID 806 8"
15=M806S 8"
15=BLY-806 8"
15=PC-802 DT 8" (Thanks for testing Kensgadget.multiply.com!)
15=Kingcom Joypad 81 (Thanks eyeshield21!)
16=E18 7cun1603 7" (Thanks PinoyDroid!)
17=ED99 8cun8900 8"     
18=Ricatech RATAB 10"
18=TomTec 10" (Thanks for VirualNobody!)
18=NetBook WM8650 10" (Thanks PADMAN!)
19=M013s 10"
20=ePad M009D 7"
21=ZX07D 7"
22=M008s 9.7" (Thanks for testing kevmyst!)
23=E18_7cun1603DT152 7"
24=E88_97cun1603153 10"
25=IMITO Im7 1.5.1 7"
26=puzhi_7inch_vt1609_ts 7"
27=M01B 1.5.3 7"
28=TP_puzhi_7inch_vt1609_ts_152 7"
29=M009plus 1.5.1 7"
30=M009SBDT 1.5.3 7" (Thanks to Gary and Kenkho for testing!)
30=SKU10374 7"
31=M731123 7"
32=SV27C151 7"
33=CEM8650701 7"
34=CEM8650702 7" (Thanks for testing Jumpjack!)
35=CEM8650801 8"
36=CEM8650971 9.7"
37=CEM8650972 9.7"
38=E10 7" (Many thanks to Maroenli02 for a lot of testing!)
39=aPad 2 9.7"
39=J355 9.7"
40=JSA8inch_std_vt1609 8"
41=8inch_vt1603 8"
42=8inch_vt1609_ts 8" (Thanks for testing jazzybazz)



BEFORE FIRMWARE UPDATING please back-up the env_uboot and wmt_scriptcmd files from your devices factory firmware you could need it later if env_uboot in list are not working for you!!!

To install do the following:
Format a SD card to FAT32 
Extract the contents of the zip file to your SD card.

If you do not use Changer.Bat ( I DONT !!!) , I am sure you are able to do the following:
Choose your env.uboot file under Firmwareinstalle/env according your device and rename env_uboot, delete all the other you have founded in that directory. 

Eventually insert SD card into your device and power on ; upgrade will run automatically. Once it’s finished wait 1 min. before removing your SD card . 
The device will reboot and you can have a cup of coffe!! 
PLEASE WAIT… and be patient, it needs 4-5 min.

the system loading screen stucked for more than 5 minutes , OK try another env_uboot or BETTER IDEA use the env_uboot and wmt_scriptcmd files from your devices factory firmware.

TIPS from Wicknix:
If you have NO sound after flashing try this fix:
Edit the env_uboot file you used and change this....
"setenv wmt.audio.i2s vt1603:f1:f2:ff:ff:100" to this "setenv wmt.audio.i2s vt1603:f2:f1:ff:ff:100"
Save and reflash.

If your camera doesn't work try this fix (works on most devices):
Edit the env_uboot file you used and change this....
"setenv wmt.gpo.cmos 1:0:7:D8110040:D8110080:D81100C0" to this "setenv wmt.gpo.camera1 1:0:7:D8110040:D8110080:D81100C0"
Save and reflash.

TIP from netizenmt:
The auto-rotation issue was also a problem with Uberoid's latest test version. Some people get it, some don't. The problem is in the env_uboot file. The values at the following line are messed up.
setenv wmt.io.mxcgsensor 1:3:4:0:-1:1:-1:2:-1

The correct values that worked for me were:
setenv wmt.io.mxcgsensor 1:3:4:0:1:1:1:2:-1

ถ้า touch ไม่ทำงานหรือ touch ไม่ตรง ให้ลองเปลี่ยน ทีใช้นี้ทีล่ะตัว
setenv wmt.io.touch 1:vt1603:2:800:480
setenv wmt.io.touch 1:uor615x:0:800:480

Or edit code.
setenv wmt.io.touch
setenv touchirq
setenv touchcodec

How To recognize this problem?
* the battery meter in the task bar has only a few steps: 100, 80, 60, 40, 20..
so the best way to check if your battery is stuck on 100% is to look under "settings" \ "about device". If it's stuck on 100%, then you need to fix!

Please report which number in the changer has this problem, it will be resolved next version.
For those who want to fix it now:
1. Get ConnectBot
2. Connect local
3. SU <enter>
4. wmtenv set wmt.vt160x.bat 0:1:10:0 <enter>
5. reboot!
6. if this setting fails, you can try wmt.vt160x.bat 1:0:10:0, some models require this value.

using connect bot and the following
wmtenv set wmt.vt160x.bat 0:1:10:0 <<100% battery
wmtenv set wmt.vt160x.bat 1:0:10:0 <<100% battery
wmtenv set wmt.vt160x.bat 0:0:10:0 <<0% battery ... switches off automatically without power lead
wmtenv set wmt.vt160x.bat 10:0:10:0 <<0% battery ... switches off automatically without power lead
You can edit env_uboot file before flashing the rom.
Known BUGS:battery indicator neeed a fix.
Thanks to Wicknix for his MODROID and EVERYBODY else from Slatedroid ! 
Use at your own risk!!!!! 


Download rom
http://www.mediafire.com/?qsx5y2jvcqxb5wy

ไม่มีความคิดเห็น:

แสดงความคิดเห็น